• Danfoss 132H2248 MCD600 Soft Starter; 3ph 575VAC + 24VAC/DC; 350HP, 377A
    Image shown is a representation only. Actual product may vary

132H2248 Danfoss

Factory New

only 1 available

  • £3,857.35

7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!


7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!

Eco Friendly Option!

Danfoss 132H2248 MCD600 Soft Starter; 3ph 575VAC + 24VAC/DC; 350HP, 377A

The 132H2248 by Danfoss (also known as the MCD60448CT7S2X00CV1) is a soft starter from the VLT Soft Starter MCD 600 line. It takes a a 3ph 380...690VAC supply /w/ a 24VAC/DC control voltage, suitable for a 350HP motor /w/ a 377A full load current in heavy duty operation (450%, 30s, 4 starts/hr) and a 450HP motor /w/ a 414A full current load in normal duty operation (350%, 30s, 4 starts/hr), both @ 575VAC nominal.

Benefits

The VLT Soft Starter MCD 600 line features an extended simulation mode, with a full simulation of start behaviour to allow testing without hooking up mains supply or a motor.
Inbuilt timers and schedulers allow for easy automation, while the pump-clean and PowerThrough functions increase uptime, staving off system failures.
A USB port comes as standard for installation, with a host of communication and application-based option cards are available.
Finally, the unit comes with a 4-line graphical display, with multiple programming setup menus that support eight different languages.

Physical Information

IP00 rated, chassis-style unit; 523mm x 216mm x 243mm (HxWxD), net weight of 16kg.
Rated for operation between -10°C...+60°C /w/ derating <40°C @ 5...95% relative humidity, non-condensing.
Suitable for use at altitudes <1000m above sea level, higher altitudes require derating.
Tolerance for pollution and vibration conformant to Pollution Degree 3 and IEC 60068-2-6 respectively.

Our Repair Process

Any products sent for repair at AFi Systems come with a 2-year warranty to ensure you can be confident in your product upon its return. We will thoroughly service your 132H2248, ensuring it is bench tested and confirmed operational. Any components subject to degradation over time such as fans and electrolytic capacitors will be replaced to ensure a greater lifespan for your soft starter.

Any Questions?

If you require any assistance or have any questions about whether this unit is right for your application and/or environment, be sure to call or email for help. AFi Systems are happy to fulfill your requests, and can ship units to you quickly.

132H2248 Specifications

Input Voltage Range (VAC) 380...690
Nominal Voltage (VAC) 575
Heavy Duty Motor Power (HP) 350
Heavy Duty Full Load Current (A) 377
Normal Duty Motor Power (HP) 450
Normal Duty Full Load Current (A) 414
# of Controlled Phases Two
Control Supply 24VAC/DC
Ingress Protection Rating IP00
Height (mm) 523
Width (mm) 216
Depth (mm) 243
Weight (kg) 16

Write a review

Note: HTML is not translated!
Rating     Bad           Good