• Danfoss 136G8776 MCD600 Soft Starter; 3ph 575VAC + 24VAC/DC; 75HP, 96A
    Image shown is a representation only. Actual product may vary

136G8776 Danfoss

Factory New

only 5 available

  • £2,438.44

7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!


7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!

Eco Friendly Option!

Danfoss 136G8776 MCD600 Soft Starter; 3ph 575VAC + 24VAC/DC; 75HP, 96A

The 136G8776 by Danfoss (also known as the MCD60144BT7S2X00CV1) is a soft starter from the VLT Soft Starter MCD 600 range. It takes a a 3ph 380...690VAC supply /w/ a 24VAC/DC control voltage, suitable for a 75HP motor /w/ a 96A full load current in heavy duty operation (450%, 30s, 4 starts/hr) and a 125HP motor /w/ a 124A full current load in normal duty operation (350%, 30s, 4 starts/hr), both @ 575VAC nominal.

Benefits

The VLT Soft Starter MCD 600 range features an extended simulation mode, with a full simulation of start behaviour to allow testing without hooking up mains supply or a motor.
Inbuilt timers and schedulers allow for painless automation, while the pump-clean and PowerThrough functions increase uptime, decreasing system failures.
A USB port comes as standard for installation, with a variety of communication and application-based option cards are offered.
Finally, the unit comes with a 4-line graphical display, with multiple programming setup menus that support eight different languages.

Physical Information

IP00 rated, chassis-style unit; 495mm x 216mm x 243mm (HxWxD), net weight of 12.7kg.
Rated for operation between -10°C...+60°C /w/ derating <40°C @ 5...95% relative humidity, non-condensing.
Suitable for use at altitudes <1000m above sea level, higher altitudes require derating.
Tolerance for pollution and vibration conformant to Pollution Degree 3 and IEC 60068-2-6 respectively.

Our Repair Process

Any products sent for repair at AFi Systems come with a 2-year warranty to ensure you can be confident in your product upon its return. We will thoroughly service your 136G8776, ensuring it is bench tested and confirmed operational. Any components subject to degradation over time such as fans and electrolytic capacitors will be replaced to ensure a greater lifespan for your soft starter.

Any Questions?

If you require any assistance or have any questions about whether this unit is right for your application and/or environment, be sure to call or email for help. AFi Systems are happy to fulfill your requests, and can ship units to you quickly.

136G8776 Specifications

Input Voltage Range (VAC) 380...690
Nominal Voltage (VAC) 575
Heavy Duty Motor Power (HP) 75
Heavy Duty Full Load Current (A) 96
Normal Duty Motor Power (HP) 125
Normal Duty Full Load Current (A) 124
# of Controlled Phases Two
Control Supply 24VAC/DC
Ingress Protection Rating IP00
Height (mm) 495
Width (mm) 216
Depth (mm) 243
Weight (kg) 12.7

Write a review

Note: HTML is not translated!
Rating     Bad           Good