• Danfoss 136G7354 MCD600 Soft Starter; 3ph 460VAC + 110...120VAC / 220...240VAC; 250HP, 321A
    Image shown is a representation only. Actual product may vary

136G7354 Danfoss

Factory New

only 1 available

  • £6,684.68

7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!


7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!

Eco Friendly Option!

Danfoss 136G7354 MCD600 Soft Starter; 3ph 460VAC + 110...120VAC / 220...240VAC; 250HP, 321A

Coming from Danfoss's VLT Soft Starter MCD 600 family, the 136G7354 (also known as the MCD60527BT5S2X00CV2) is a soft starter taking a 3ph 200...525VAC supply /w/ a 110...120VAC / 220...240VAC control voltage, suitable for a 250HP motor /w/ a 321A full load current in heavy duty operation (450%, 30s, 4 starts/hr) and a 350HP motor /w/ a 414A full current load in normal duty operation (350%, 30s, 4 starts/hr), both @ 460VAC nominal.

Benefits

The VLT Soft Starter MCD 600 family sports an extended simulation mode, with a full simulation of start behaviour to allow testing without connecting mains supply or a motor.
Inbuilt timers and schedulers allow for easy automation, while the pump-clean and PowerThrough functions allow more uptime, staving off system failures.
A USB port comes as standard for installation, with a variety of communication and application-based option cards are offered.
Finally, the unit comes with a 4-line graphical display, with multiple programming setup menus that support eight different languages.

Physical Information

IP00 rated, chassis-style unit; 523mm x 216mm x 243mm (HxWxD), net weight of 19kg.
Rated for operation between -10°C...+60°C /w/ derating <40°C @ 5...95% relative humidity, non-condensing.
Suitable for use at altitudes <1000m above sea level, higher altitudes require derating.
Tolerance for pollution and vibration conformant to Pollution Degree 3 and IEC 60068-2-6 respectively.

Our Repair Process

Any products sent for repair at AFi Systems come with a 2-year warranty to ensure you can be confident in your product upon its return. We will thoroughly service your 136G7354, ensuring it is bench tested and confirmed operational. Any components subject to degradation over time such as fans and electrolytic capacitors will be replaced to ensure a greater lifespan for your soft starter.

Any Questions?

If you require any assistance or have any questions about whether this unit is right for your application and/or environment, be sure to call or email for help. AFi Systems are happy to fulfill your requests, and can ship units to you quickly.

136G7354 Specifications

Input Voltage Range (VAC) 200...525
Nominal Voltage (VAC) 460
Heavy Duty Motor Power (HP) 250
Heavy Duty Full Load Current (A) 321
Normal Duty Motor Power (HP) 350
Normal Duty Full Load Current (A) 414
# of Controlled Phases Two
Control Supply 110...120VAC / 220...240VAC
Ingress Protection Rating IP00
Height (mm) 523
Width (mm) 216
Depth (mm) 243
Weight (kg) 19

Write a review

Note: HTML is not translated!
Rating     Bad           Good