• Danfoss 136G8766 MCD600 Soft Starter; 3ph 460VAC + 24VAC/DC; 50HP, 65A
    Image shown is a representation only. Actual product may vary

136G8766 Danfoss

Factory New

only 5 available

  • £1,797.30

7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!


7-10 Days Delivery!

Manufacturer Warranty!

Secure Checkout!

Eco Friendly Option!

Danfoss 136G8766 MCD600 Soft Starter; 3ph 460VAC + 24VAC/DC; 50HP, 65A

Coming from Danfoss's VLT Soft Starter MCD 600 line, the 136G8766 (full part #: MCD60108BT5S1X20CV1) is a soft starter taking a 3ph 200...525VAC supply /w/ a 24VAC/DC control voltage, suitable for a 50HP motor /w/ a 65A full load current in heavy duty operation (450%, 30s, 4 starts/hr) and a 60HP motor /w/ a 81A full current load in normal duty operation (350%, 30s, 4 starts/hr), both @ 460VAC nominal.

Benefits

The VLT Soft Starter MCD 600 series features an extended simulation mode, with a full simulation of start behaviour to allow testing without connecting mains supply or a motor.
Built-in timers and schedulers allow for painless automation, while the pump-clean and PowerThrough functions allow more uptime, decreasing system failures.
A USB port comes as standard for installation, with a variety of communication and application-based option cards are available.
Finally, the unit comes with a 4-line graphical display, with multiple programming setup menus that support eight different languages.

Physical Information

IP20 rated, chassis-style unit; 336mm x 152mm x 231mm (HxWxD), net weight of 5.5kg.
Rated for operation between -10°C...+60°C /w/ derating <40°C @ 5...95% relative humidity, non-condensing.
Suitable for use at altitudes <1000m above sea level, higher altitudes require derating.
Tolerance for pollution and vibration conformant to Pollution Degree 3 and IEC 60068-2-6 respectively.

Our Repair Process

Any products sent for repair at AFi Systems come with a 2-year warranty to ensure you can be confident in your product upon its return. We will thoroughly service your 136G8766, ensuring it is bench tested and confirmed operational. Any components subject to degradation over time such as fans and electrolytic capacitors will be replaced to ensure a greater lifespan for your soft starter.

Any Questions?

If you require any assistance or have any questions about whether this unit is right for your application and/or environment, be sure to call or email for help. AFi Systems are happy to fulfill your requests, and can ship units to you quickly.

136G8766 Specifications

Input Voltage Range (VAC) 200...525
Nominal Voltage (VAC) 460
Heavy Duty Motor Power (HP) 50
Heavy Duty Full Load Current (A) 65
Normal Duty Motor Power (HP) 60
Normal Duty Full Load Current (A) 81
# of Controlled Phases Two
Control Supply 24VAC/DC
Ingress Protection Rating IP20
Height (mm) 336
Width (mm) 152
Depth (mm) 231
Weight (kg) 5.5

Write a review

Note: HTML is not translated!
Rating     Bad           Good